Component Inspection

1. Apply 12 V to stop lamp relay connector terminal (1 and 2).
   CAUTION:

   • Never make the terminals short.
   • Connect the fuse between the terminals when applying the voltage.
2. Check the continuity between stop lamp relay connector terminals.

   Stop lamp relay	Condition	Continuity
   Terminal
   3 - 5	Apply 12 V to stop lamp relay connector terminal (1 and 2)	Existed
   	Do not apply 12 V to stop lamp relay connector terminal (1 and 2)	Not existed

3. Check resistance between stop lamp relay connector terminals.

   Stop lamp relay	Resistance
   Terminal
   1 - 2	Approx. 50 Ω

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace the stop lamp relay.