LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2024 >> Armada SL, 4WD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System >> Component/Circuit Diagnosis >> Stop Lamp Switch >> Component Inspection

Component Inspection

  1. CHECK STOP LAMP SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect stop lamp switch harness connector.
    3. Check the continuity when stop lamp switch is operated.
    Stop lamp switch Condition Continuity
    Terminal
    1 - 2
    3 - 4    		 When stop lamp switch is released
    (When brake pedal is depressed)    		 Existed
    When stop lamp switch is pressed
    (When brake pedal is released)    		 Not existed

    Is the inspection result normal?

    YES>>

    INSPECTION END

    NO>>

    Replace the stop lamp switch. Refer to BRAKE PEDAL : Removal and Installation .

scientia non olet · About LEMON Manuals