Work Procedure

CONSULT Configuration. Read out the vehicle specification from the old air bag diagnosis sensor unit and save the vehicle specification to CONSULT. Refer to "Configuration" in the "CONSULT Operation Manual".

NOTE:

• For the air bag diagnosis sensor unit, the Type ID is stored in CONSULT.
• The Type ID is the part number (vehicle specification) that is to be written to the air bag diagnosis sensor unit.

>>

GO TO 2.

Replace air bag diagnosis sensor unit. Refer to Removal and Installation .

>>

GO TO 3.

CONSULT Configuration. Perform writing of the saved vehicle specification data according to the "Configuration" procedure in the "CONSULT Operation Manual". Refer to Description .

>>

END