Inspection Procedure
- CHECK BATTERY TERMINALS CONNECTION
Check if battery terminals are clean and tight. Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair battery terminals connection.
- CHECK FUSE
Check for blown fuse.
Power source (Power supply terminals) Fuse No. Capacity Battery ("S" terminal) 69 10 A Ignition switch ON ("L" terminal) 11 5 A Is the inspection result normal?
YES>>
GO TO 3.
NO>>
Be sure to eliminate the cause of malfunction before installing new fuse.
- CHECK GROUND CONNECTION
Check if alternator ground is clean and tight. Is the inspection result normal?
YES>>
GO TO 4.
NO>>
Repair ground connection.
- CHECK DRIVE BELT TENSION
Check drive belt tension. Refer to Inspection . Is the inspection result normal?
YES>>
INSPECTION END
NO>>
Repair as needed.