Work Flow

OVERALL SEQUENCE

Courtesy of NISSAN

DETAILED FLOW

INTERVIEW AND SYMPTOM CONFIRMATION
1. Check the malfunction symptoms by performing the following items.
  - Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
  - Check the symptom.
Is the occurred symptom malfunction?

YES>>

GO TO 2.

NO>>

INSPECTION END
DIAGNOSIS WITH CONSULT
1. 1. Connect CONSULT and perform a self-diagnosis for "MULTI AV". Refer to CONSULT Function .
    NOTE: Skip to step 4 of the diagnosis procedure if "MULTI AV" is not displayed.
  2. When DTC is detected, follow the instructions below:
    - Record DTC and Freeze Frame Data.
Is DTC displayed?

YES>>

GO TO 3.

NO>>

GO TO 4.
TROUBLE DIAGNOSIS FOR DTC
1. 1. Check the DTC indicated in the "Self-Diagnosis Results".
  2. Perform the relevant diagnosis referring to the DTC Index. Refer to DTC Index .
>>

GO TO 5.
TROUBLE DIAGNOSIS FOR SYMPTOMS
1. Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to Symptom Table .
>>

GO TO 5.
ERROR PART REPAIR
1. 1. Repair or replace the identified malfunctioning parts.
  2. Perform a self-diagnosis for "MULTI AV" with CONSULT.
    NOTE: Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC has been indicated in the "Self-Diagnosis Results".
  3. Check that the symptom does not occur.
Does the symptom occur?

YES>>

GO TO 1.

NO>>

INSPECTION END