Disassembly and Assembly

Disassembly 

NOTE: Before disassembly, note the proper placement of the wires to the correct terminals and correct wire routing to the terminals.

1. Disconnect fuel level sensor unit (A) and fuel tank temperature sensor (C) harness connectors. Press the tabs on the terminals to release the locking tabs.

   Courtesy of NISSAN NORTH AMERICA, INC.

   (B):	Fuel pump harness connector

2. Release the two clips and remove the fuel temperature sensor from the pump assembly.

   Courtesy of NISSAN NORTH AMERICA, INC.

3. Release the tab (A) and slide the level sensor unit module and float arm assembly (B) up to remove.

   Courtesy of NISSAN NORTH AMERICA, INC.

Assembly 

Assembly is the reverse order of disassembly.

NOTE:

• Ensure proper placement of the wires to the correct terminals and correct wire routing to the terminals.
• After connecting terminals, ensure they are securely locked and cannot be pulled out.
• When installing the level sensor unit, push down until the tab is locked into place.