Symptom Table

CONSULT

1. Perform the data monitor of CONSULT to check for any malfunctioning item.
2. Check the malfunction combinations.

   Malfunction item: x

   Malfunction combination	Data monitor item
   	FR WIPER HI	FR WIPER LOW	FR WASHER SW	FR WIPER INT	INT VOLUME	RR WIPER ON	RR WIPER INT	RR WASHER SW	TURN SIGNAL R	TURN SIGNAL L	TAIL LAMP SW	HI BEAM SW	HEAD LAMP SW	LIGHT OFF SW	AUTO LIGHT SW	FR FOG SW	Fr wiper stop
   A												x				x
   B					x						x		x		x
   C			x					x	x	x
   D	x	x		x										x
   E					x	x	x
   F																	x
   G		x	x		x												x
   H	x				x			x				x
   I				x			x						x
   J						x				x					x
   K									x		x			x		x
   L	All Items
   M	If only one item is detected or the item is not applicable to the combinations A to K

3. Identify the malfunctioning part from the agreed combination and repair or replace the part.

   Malfunction combination	Malfunctioning part	Repair or replace
   A	Combination switch INPUT 1 circuit	Inspect the combination switch input circuit applicable to the malfunctioning part. Refer to Diagnosis Procedure .
   B	Combination switch INPUT 2 circuit
   C	Combination switch INPUT 3 circuit
   D	Combination switch INPUT 4 circuit
   E	Combination switch INPUT 5 circuit
   F	Combination switch INPUT 6 circuit
   G	Combination switch OUTPUT 1 circuit	Inspect the combination switch output circuit applicable to the malfunctioning part. Refer to Diagnosis Procedure .
   H	Combination switch OUTPUT 2 circuit
   I	Combination switch OUTPUT 3 circuit
   J	Combination switch OUTPUT 4 circuit
   K	Combination switch OUTPUT 5 circuit
   L	BCM	Replace BCM. Refer to Removal and Installation .
   M	Combination switch	Replace the combination switch. Refer to Removal and Installation .