Anti-Pinch Inspection: Description

If any of the following operations are performed, the initialization is necessary for normal operation of anti-pinch function:

• Disconnection and connection of battery cable from negative terminal.
• When main power window and door lock/unlock switch replaced.
• Electric power supply to main power window and door lock/unlock switch or power window motor LH is interrupted by blown fuse or disconnection and connection of the negative terminal of battery, etc.
• Disconnection and connection of main power window and door lock/unlock switch harness connector.
• Removal of power window motor LH from regulator assembly.
• Operation of regulator assembly as an independent unit.
• Removal and installation of glass.
• Removal and installation of door glass run.