Self Diagnostic Result
Refer to DTC Index .
When "CRNT" is displayed on self-diagnosis result
- The system is presently malfunctioning.
When "PAST" is displayed on self-diagnosis result
- System malfunction in the past is detected, but the system is presently normal.
Freeze frame data (FFD)
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.
|
Item |
Unit |
Description |
|
ODO/TRIP METER |
km |
Displays the total mileage (Odometer value) of the moment a particular. |
|
DTC count |
Count |
Displays the number of times DTC is detected. |
|
DTC LOCAL CODE |
-- |
Displays but not used. |
|
Variant code |
-- |
Displays but not used. |
|
Battery voltage |
V |
Displays the 12V battery power supply voltage. |
|
ACC voltage |
V |
Displays the ACC power supply voltage. |
|
CONTROL MODULE MALF |
-- |
Displays but not used. |
|
Diag permission condition |
Not permission / Permission / Abnormal / Not used |
Displays the CAN network diagnosis status. |
|
Chassis control malfunction display |
On / Off |
Displays the status of requesting to display the chassis control warning on the information display. |
|
VEHICLE SPEED |
km/h |
Displays the vehicle speed. |
|
FR WHEEL SPEED |
rpm |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED |
rpm |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED |
rpm |
Displays the rotational speed of front RH tire. |
|
RL WHEEL SPEED |
rpm |
Displays the rotational speed of front LH tire. |
|
STEERING ANG SENSOR |
deg |
Displays the steering angle from the steering angle sensor. |
|
DECEL G SENSOR |
G |
Displays the decel G. |
|
SIDE G SENSOR |
G |
Displays the side G. |
|
ACCELE PEDAL POSITION |
% |
Displays the accelerator pedal position. |
|
PRESS SENSOR |
bar |
Displays the brake fluid pressure. |
|
Throttle control |
Normal / Abnormal 1 / Abnormal 2 / Abnormal 3 |
Displays the electric throttle status. |
|
SHIFT POSITION |
-- |
Displays the shift position. |
|
STOP LAMP SW |
Brake pedal not operation / Brake pedal operation 1 / Brake pedal operation 2 / Abnormal |
Displays the stop lamp switch status. |
|
Steering angle sensor |
Calibration incomplete 1 / Calibration incomplete 2 / Malfunction / Calibration complete 1 / Calibration complete 2 |
Displays the calibration of steering neutral position status. |
|
ABS |
INACT / ACTIVE |
Displays the ABS function status. |
|
ABS MALF |
On / Off |
Displays the ABS function malfunction status. |
|
TCS |
INACT / ACTIVE |
Displays the TCS function status. |
|
TCS MALF |
On / Off |
Displays the TCS function malfunction status. |
|
VDC |
INACT / ACTIVE |
Displays the VDC function status. |
|
VDC MALF |
On / Off |
Displays the VDC function malfunction status. |
|
VDC OFF SWITCH |
On / Off |
Displays the VDC function OFF status. |
|
Parking brake operation status |
Release / Apply / Abnormal |
Displays the electric parking brake system status. |
|
Stop hold (VDC) |
Release / Hold / Impossible |
Displays the standstill status of VDC function. |
|
FR wheel speed pulse (stop hold) |
-- |
Displays the wheel speed pulse count on hold (front RH) |
|
FL wheel speed pulse (stop hold) |
-- |
Displays the wheel speed pulse count on hold (front LH) |
|
RR wheel speed pulse (stop hold) |
-- |
Displays the wheel speed pulse count on hold (R/R) |
|
RL wheel speed pulse (stop hold) |
-- |
Displays the wheel speed pulse count on hold (rear LH) |
|
ICC status |
Off / Operation / Stop / Wait / Suspend / Brake mode / Regulation / Driver override / Malfunction |
Displays the control status of ADAS system. |
|
ABH warning display request |
No request / Request |
Displays the status of requesting to display the automatic brake hold warning on the information display. |
|
ABH select status |
OFF mode / STEP mode / AUTO mode |
Displays the select status of automatic brake hold function. |
|
ABH status 1 |
Inactive / Active |
Displays the automatic brake hold function status (immediately before confirmation of abnormality) |
|
ABH status 2 |
Inactive / Active |
Displays the automatic brake hold fuction status (current) |
|
EPB active request (ABH) |
No request / Request |
Displays the electric parking brake active request status from automatic brake hold function. |
|
ABH stop hold request 2 |
No request / Request |
Displays the standstill request of automatic brake hold function. |
|
ABH status 3 |
No request / Request |
Displays the standstill request status of ProPILOT (immediately before confirmation of abnormality) |
|
ProPILOT stop hold status |
No request / Request |
Displays the standstill request status of ProPILOT (current) |
|
EPB active request (ProPILOT) |
Inactive / Active |
Displays the chang request status ProPILOT to electric parking brake system. |
|
ABH active request (ProPILOT) |
No request / Request |
Displays the standstill request status of ProPILOT. |
|
DRIVE MODE SELECTOR |
Mode 0 - 30 |
Displays the selected mode of drive mode select switch (2WD models) |
|
User |
-- |
Displays but not used. |
|
Drive Mode Selector |
Position 0 - 255 |
Displays the selected mode of drive mode select switch (AWD models) |
|
Engine/TM setting |
Mode 1 - 14 |
Displays the engine/transmission setting status with drive mode select switch. |
|
STRG SETTING |
Mode 1 - 14 |
Displays the steering setting status with drive mode select switch. |
|
4WD setting |
Mode 1 - 6 |
Displays the AWD setting status with drive mode select switch. |
|
ATC SETTING |
On / Off |
Displays the intelligent trace control function setting status with drive mode select switch. |
|
ICC setting |
-- |
Displays but not used. |
|
Suspension setting |
-- |
Displays but not used. |
|
I-KEY LINK |
-- |
Displays but not used. |
|
LOG-IN PERMIS |
-- |
Displays but not used. |
|
Drive mode select switch (UP) |
Not operation / Operation |
Displays the "Up" operation status of drive mode select switch (2WD models). |
|
Drive mode select switch (DOWN) |
Not operation / Operation |
Displays the "Down" operation status of drive mode select switch (2WD models). |