Data Monitor
|
Item |
Unit |
Description |
|
Battery voltage |
V |
Displays the 12V battery power supply voltage. |
|
ACC voltage |
V |
Displays the ACC power supply voltage. |
|
CONTROL MODULE MALF |
On / Off |
Displays the chassis control module malfunction. |
|
Diag permission condition |
Not permission / Permission / Abnormal / Not used |
Displays the CAN network diagnosis status. |
|
Chassis control malfunction display |
On / Off |
Displays the status of requesting to display the chassis control warning on the information display. |
|
VEHICLE SPEED |
km/h |
Displays the vehicle speed. |
|
Vehicle speed |
km/h |
Displays the wheel speed. |
|
FR WHEEL SPEED |
rpm |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED |
rpm |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED |
rpm |
Displays the rotational speed of front RH tire. |
|
RL WHEEL SPEED |
rpm |
Displays the rotational speed of front LH tire. |
|
STEERING ANG SENSOR |
deg |
Displays the steering angle from the steering angle sensor. |
|
DECEL G SENSOR |
G |
Displays the decel G. |
|
Decel G |
G |
Displays the decel G (after correction). |
|
SIDE G SENSOR |
G |
Displays the side G. |
|
YAW RATE SENSOR |
deg/s |
Displays the yaw rate. |
|
ACCELE PEDAL POSITION |
% |
Displays the accelerator pedal position. |
|
PRESS SENSOR |
bar |
Displays the brake fluid pressure. |
|
Throttle control |
Normal / Abnormal 1 / Abnormal 2 / Abnormal 3 |
Displays the electric throttle status. |
|
SHIFT POSITION |
-- |
Displays the shift position. |
|
Shift position (R) |
R / Not R |
Displays the sift position (R) status. |
|
STOP LAMP SW |
Brake pedal not operation / Brake pedal operation 1 / Brake pedal operation 2 / Abnormal |
Displays the stop lamp switch status. |
|
ABS |
INACT / ACTIVE |
Displays the ABS function status. |
|
ABS MALF |
On / Off |
Displays the ABS function malfunction status. |
|
EBD |
INACT / ACTIVE |
Displays the EBD function status. |
|
TCS |
INACT / ACTIVE |
Displays the TCS function status. |
|
TCS MALF |
On / Off |
Displays the TCS function malfunction status. |
|
VDC |
INACT / ACTIVE |
Displays the VDC function status. |
|
VDC MALF |
On / Off |
Displays the VDC function malfunction status. |
|
VDC OFF SWITCH |
On / Off |
Displays the VDC function OFF status. |
|
ICC brake active status |
Abnormal / NO PER / PERMIT |
Displays the execution status for braking function of ADAS system. |
|
Yaw rate (ADAS) |
Braking fully operational / Impossible to execute request / Abnormal |
Displays the execution status for yaw function of ADAS system. |
|
ProPILOT park |
-- |
Displays but not used. |
|
Parking brake operation status |
Release / Apply / Abnormal |
Displays the electric parking brake system status. |
|
Stop hold (VDC) |
Release / Hold / Impossible |
Displays the standstill status of VDC function. |
|
FR wheel speed pulse (stop hold) |
-- |
Displays the wheel speed pulse count on hold (front RH). |
|
FL wheel speed pulse (stop hold) |
-- |
Displays the wheel speed pulse count on hold (front LH). |
|
RR wheel speed pulse (stop hold) |
-- |
Displays the wheel speed pulse count on hold (rear RH). |
|
RL wheel speed pulse (stop hold) |
-- |
Displays the wheel speed pulse count on hold (rear LH). |
|
Command BR torque (IEB) 1 |
-- |
Displays but not used. |
|
Command BR torque (IEB) 2 |
-- |
Displays but not used. |
|
Brake torque request |
Nm |
Displays the brake torque value of active ride control. |
|
Command BR torque (CCS) |
-- |
Displays but not used. |
|
Command BR torque (HPCM) |
-- |
Displays but not used. |
|
Command BR torque (ADAS) 1 |
Nm |
Displays the control command brake torque from ADAS control unit 2 (Longitudinal direction). |
|
Command BR torque (ADAS) 2 |
Nm |
Displays the control command brake torque from ADAS control unit 2 (Turn direction). |
|
Reg brake request (HPCM) |
-- |
Displays but not used. |
|
Driver brake torque request |
-- |
Displays but not used. |
|
CC/SL active status 1 |
-- |
Displays but not used. |
|
Yaw control status |
-- |
Displays but not used. |
|
Control status (VDC) 1 |
Impossi / Possible |
Displays the control command accept status of VDC function (Longitudinal direction). |
|
Control status (VDC) 2 |
Impossi / Possible |
Displays the control command accept status of VDC function (Lateral direction). |
|
Maintenance mode status |
NOT / No req / request / Unavail |
Displays the maintenance mode status. |
|
Reg brake status (VDC) |
-- |
Displays but not used. |
|
Engine control status 1 |
-- |
Displays but not used. |
|
Engine control status 2 |
-- |
Displays but not used. |
|
CC/SL active status 2 |
-- |
Displays but not used. |
|
Brake active request (ADAS) 1 |
Impossi / Possible |
Displays the brake request accept status to VDC function from ADAS control unit 2. |
|
Brake active request (ADAS) 2 |
No Brake Request / 1 / 2 |
Displays the brake request status from ADAS control unit 2. |
|
Brake active request (ADAS) 3 |
NO REQ / REQ |
Displays the brake request status from ADAS control unit 2. |
|
Rear wheel steering status 1 |
-- |
Displays but not used. |
|
Rear wheel steering status 2 |
-- |
Displays but not used. |
|
ATC/ITC status 2 |
normal / fail |
Displays the intelligent trace control function status. |
|
ATC/ITC status 3 |
normal / fail |
Displays the intelligent trace control function status. |
|
ATC/ITC status 4 |
normal / fail |
Displays the intelligent trace control function status. |
|
ATC/ITC status 5 |
normal / fail |
Displays the intelligent trace control function status. |
|
ITC/ATC status (ENG control) 1 |
-- |
Displays but not used. |
|
ITC/ATC status (ENG control) 2 |
-- |
Displays but not used. |
|
ITC/ATC status (BR control) 1 |
-- |
Displays but not used. |
|
ITC/ATC status (BR control) 2 |
-- |
Displays but not used. |
|
IEB/AEB status 1 |
-- |
Displays but not used. |
|
IEB/AEB status 2 |
-- |
Displays but not used. |
|
ARC/IRC status 1 |
normal / fail |
Displays the active ride control function status. |
|
ARC/IRC status 2 |
normal / fail |
Displays the active ride control function status. |
|
Chassis control (ADAS) 1 |
normal / fail |
Display the chassis control module control status of ADAS control unit 2. |
|
Chassis control (ADAS) 2 |
normal / fail |
Display the chassis control module control status of ADAS control unit 2. |
|
ARC/IRC status 3 |
normal / fail |
Displays the active ride control function status. |
|
ARC/IRC status 4 |
normal / fail |
Displays the active ride control function status. |
|
ICC status |
Off / Operation / Stop / Wait / Suspend / Brake mode / Regulation / Driver override / Malfunction |
Displays the control status of ADAS system. |
|
ABH warning display request |
No request / Request |
Displays the status of requesting to display the automatic brake hold warning on the information display. |
|
ABH select status |
OFF mode / STEP mode / AUTO mode |
Displays the select status of automatic brake hold function. |
|
ABH status 1 |
Inactive / Active |
Displays the automatic brake hold function status (immediately before confirmation of abnormality). |
|
ABH status 2 |
Inactive / Active |
Displays the automatic brake hold fuction status (current). |
|
EPB active request (ABH) |
No request / Request |
Displays the electric parking brake active request status from automatic brake hold function. |
|
ABH stop hold request 2 |
No request / Request |
Displays the standstill request of automatic brake hold function. |
|
ABH status 3 |
No request / Request |
Displays the standstill request status of ProPILOT (immediately before confirmation of abnormality). |
|
ProPILOT stop hold status |
No request / Request |
Displays the standstill request status of ProPILOT (current). |
|
EPB active request (ProPILOT) |
Inactive / Active |
Displays the chang request status ProPILOT to electric parking brake system. |
|
ABH active request (ProPILOT) |
No request / Request |
Displays the standstill request status of ProPILOT. |
|
DRIVE MODE SELECTOR |
Mode 0 - 30 |
Displays the selected mode of drive mode select switch (2WD models). |
|
User |
-- |
Displays but not used. |
|
Drive Mode Selector |
Position 0 - 255 |
Displays the selected mode of drive mode select switch (AWD models). |
|
Engine/TM setting |
Mode 1 - 14 |
Displays the engine/transmission setting status with drive mode select switch. |
|
STRG SETTING |
Mode 1 - 14 |
Displays the steering setting status with drive mode select switch. |
|
4WD setting |
Mode 1 - 6 |
Displays the AWD setting status with drive mode select switch. |
|
ATC SETTING |
On / Off |
Displays the intelligent trace control function setting status with drive mode select switch. |
|
ICC setting |
-- |
Displays but not used. |
|
Suspension setting |
-- |
Displays but not used. |
|
I-KEY LINK |
-- |
Displays but not used. |
|
LOG-IN PERMIS |
-- |
Displays but not used. |
|
Drive mode select switch (UP) |
Not operation / Operation |
Displays the "Up" operation status of drive mode select switch (2WD models). |
|
Drive mode select switch (DOWN) |
Not operation / Operation |
Displays the "Down" operation status of drive mode select switch (2WD models). |