LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2022 >> Rogue SL, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Control System >> Basic Inspection >> Additional Service When Replacing BCM >> Work Procedure

Work Procedure

  1. REPLACE BCM 

    Replace BCM. Refer to Removal and Installation .

    YES

    GO TO 2.

  2. WRITING VEHICLE SPECIFICATION 

    Perform configuration (BCM). Refer to Description .

    YES

    GO TO 3.

  3. PAIRING OF BCM AND INTELLIGENT KEY UNIT 
    CAUTION: When before pairing of BCM and Intelligent Key unit, always writing the BCM configuration. Or not doing so, BCM control function does not operate normally.

    Perform the pairing of BCM and Intelligent Key unit. Press UNLOCK button of Intelligent Key.

    YES

    GO TO 4.

  4. REGISTER OF VEHICLE IDENTIFICATION NUMBER 

    SYMBOL With CONSULT

    1. Select "VIN REGISTRATION" of BCM (BCM) work support item.
    2. Refer to CONSULT and follow the on-screen instructions.

    YES

    GO TO 5

  5. WRITING MAC KEY 

    Perform MAC key writing. Refer to Description .

    YES

    GO TO 6.

  6. TIRE PRESSURE SENSOR ID REGISTRATION (IF EQUIPPED) 

    Perform the initialization and registration of tire pressure sensor ID. Refer to Description .

    YES

    WORK END

scientia non olet · About LEMON Manuals