Work Procedure
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any means other than CONSULT.)
- Replacing ABS actuator and electric unit (control unit)
- CHANGE OF SYSTEM MODE
CONSULT
- Select "ABS ", "WORK SUPPORT ", and "SYSTEM MODE CHANGE " according to this order.CAUTION: Never operate the parking brake switch.
- Touch "START ".
- Check display item "FACTORY MODE ".
Is the inspection result "Off "?
YES
GO TO 2.
NO
Perform change of system mode again.
- Select "ABS ", "WORK SUPPORT ", and "SYSTEM MODE CHANGE " according to this order.
- PERFORM THE SELF-DIAGNOSIS
- Pull parking brake switch to activate electric parking brake.
- Push parking brake switch to release electric parking brake.
- Perform self-diagnosis for "ABS ".
Is malfunction detected?
YES
Check the DTC. Refer to DTC Index .
NO
Inspection End