LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2022 >> Altima SV, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Brake Control System) >> Basic Inspection >> Additional Service When Replacing Control Unit >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2022 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM THE NEUTRAL POSITION ADJUSTMENT FOR THE STEERING ANGLE SENSOR 

    Perform the neutral position adjustment for the steering angle sensor.

    Refer to Work Procedure , GO TO 2.

  2. PERFORM CALIBRATION OF THE DECEL G SENSOR 

    Perform calibration of the decel G sensor.

    Refer to Work Procedure .

scientia non olet · About LEMON Manuals