Detailed Flow
WARNING: This page is about a different car, the 2022 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
- INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items:
- Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
- Check the symptom.
Is the occurred symptom a malfunction?
YES
GO TO 2.
NO
Inspection End.
- DIAGNOSIS WITH CONSULT
CONSULT
- Select "Self Diagnostic Result" mode of "AVM". Refer to CONSULT Function .NOTE: Skip to step 4 of the diagnosis procedure if "AVM" is not displayed.
- When DTC is detected, follow the instructions below:
- Record DTC and Freeze Frame Data (FFD).
Is DTC displayed?
YES
GO TO 3.
NO
GO TO 4.
- Select "Self Diagnostic Result" mode of "AVM". Refer to CONSULT Function .
- TROUBLE DIAGNOSIS FOR DTC
- Check the DTC indicated in the "Self Diagnostic Result".
- Perform the relevant diagnosis referring to the DTC Index. Refer to DTC Index .
GO TO 5.
- TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to Symptom Table .
GO TO 5.
- ERROR PART REPAIR
- Repair or replace the identified malfunctioning parts.
- Select "Self Diagnostic Result" mode of "AVM".NOTE: Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC has been indicated in the "Self Diagnostic Result".
- Check that the symptom does not occur.
Does the symptom occur?
YES
GO TO 1.
NO
Inspection End.