ADAS Control Unit Input/Output Signal Item
ADAS control unit receives signals via CAN communication. It also detects vehicle conditions that are necessary for Blind Spot Warning control.
Input Signal Item
|
Transmit unit |
Signal name |
Description |
||
|
TCM * |
CAN communication |
Shift position signal |
Receives a select lever position |
|
|
ABS actuator and electric unit (control unit) |
CAN communication |
Vehicle speed signal (ABS) |
Receives wheel speeds of four wheels |
|
|
BCM |
CAN communication |
Turn indicator signal |
Receives an operational state of the turn signal lamp and the hazard lamp |
|
|
Dimmer signal |
Receives ON/OFF state of dimmer signal |
|||
|
Combination meter |
CAN communication |
System selection signal |
Receives a selection state of each item in "Driving Aids" selected with the information display |
|
|
Side radar LH, RH |
CAN communication |
Vehicle detection signal |
Receives vehicle detection condition of detection zone |
|
*: CVT models
Output Signal Item
|
Reception unit |
Signal name |
Description |
||
|
ABS actuator and electric unit (via chassis control module) |
CAN communication |
Brake fluid pressure control signal |
Transmits a brake fluid pressure control signal to activates the brake |
|
|
Combination meter |
CAN communication |
Meter display signal |
BSW system display signal |
Transmits a meter display signal to turn ON the Blind Spot Warning system display |
|
Side radar LH, RH |
CAN communication |
Vehicle speed signal |
Transmits a vehicle speed calculated by the ADAS control unit |
|
|
Blind Spot Warning indicator signal |
Transmits a Blind Spot Warning indicator signal to turn ON the Blind Spot Warning indicator |
|||
|
Blind Spot Warning indicator dimmer signal |
Transmits a Blind Spot Warning indicator dimmer signal to dimmer Blind Spot Warning indicator |
|||
|
Driver assistance buzzer |
Driver assistance buzzer signal |
Activates a warning buzzer signal to activate the buzzer. |
||