Front Wiper Control
IPDM E/R detects front wiper stop position by front wiper stop position signal.
When front wiper stop position signal is in the condition listed below while the front wiper is operating, IPDM E/activates the fail-safe.
|
Ignition switch |
Front wiper switch |
Front wiper stop position signal |
Fail-safe |
|
ON |
OFF |
The signal does not change from the battery voltage for 10 seconds. |
Stops front wiper power supply for 20 seconds. |
|
Except OFF |
The signal does not change for 10 seconds. |