LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Chassis Control System) >> Chassis Control >> Removal And Installation >> Chassis Control Module >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If chassis control module is replaced, user registration information is erased and all setting items for NISSAN InTuition related parts are erased.
  1. Remove glove box assembly. Refer to Removal and Installation .
  2. Remove screw from chassis control module bracket.
  3. Disconnect harness connector from chassis control module and remove chassis control module.
    CAUTION: Do not drop chassis control module.
scientia non olet · About LEMON Manuals