Detailed Flow
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- INTERVIEW FOR MALFUNCTION
It is important to clarify the customer's concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE: The customers are not professionals. Never assume that "maybe the customer means..." or "maybe the customer mentioned this symptom".GO TO 2
- SELF DIAGNOSTIC RESULT WITH CONSULT
CONSULT
- Select "Self Diagnostic Result" mode of "LASER/RADAR".
- Check if the DTC is detected in the "Self Diagnostic Result" mode of "LASER/RADAR".
Is any DTC detected?
YES
GO TO 5
NO
GO TO 3
- ACTION TEST
Perform the ICC system action test to check the system operation. Check if any other malfunctions occur.
GO TO 4
- SYMPTOM DIAGNOSIS
Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to Symptom Table .
GO TO 6
- TROUBLE DIAGNOSIS BY DTC
- Check the DTC in the "Self Diagnostic Result".
- Perform trouble diagnosis for the detected DTC. Refer to DTC Index .
GO TO 6
- MALFUNCTIONING PART REPAIR
Repair or replace the identified malfunctioning parts.
GO TO 7
- REPAIR CHECK (SELF DIAGNOSTIC RESULT WITH CONSULT)
- Erase "Self Diagnostic Result".
- Select "Self Diagnostic Result" again after repairing or replacing the specific items.
- Check if any DTC is detected in "Self Diagnostic Result" mode of "LASER/RADAR".
Is any DTC detected?
YES
GO TO 5
NO
GO TO 8
- REPAIR CHECK (ACTION TEST)
Perform the ICC system action test. Check that the malfunction symptom is solved or no other symptoms occur.
Is there a malfunction symptom?
YES
GO TO 4
NO
Inspection End.