Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before disassembly, note the proper placement of the wires to the correct terminals and correct wire routing to the terminals.

Disconnect the fuel level sensor unit (A) and the fuel tank temperature sensor (C) harness connectors. Press the tabs on the terminals to release the locking tabs.

Courtesy of NISSAN NORTH AMERICA, INC.

(B)	: Fuel pump harness connector

Release the two clips and remove the fuel tank temperature sensor from the pump assembly.

Courtesy of NISSAN NORTH AMERICA, INC.
Release the tab (A) and slide the fuel level sensor unit and float arm assembly up (B) to remove.

Courtesy of NISSAN NORTH AMERICA, INC.