Linking Key Fob To Meter Display Function Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Performing the following operation associates the registered driving position with Intelligent Key. When driver door unlock operation is performed by Intelligent Key or driver door request switch, display of the registered driving position and turnout operation can be performed.
- STEP 1
Check the following conditions:
- Ignition switch: ON
- Initialization: done
- Driving position: registered
GO TO STEP 2 .
- STEP 2
- Switch ignition from ON to OFF (ADP memory automatically at the ignition OFF timing).
GO TO STEP 3 .
- STEP 3
Confirm the operation of each part with memory operation and linking a key fob to the meter display operation.
Inspection End.