LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Power Distribution System) >> Power Distribution System >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK PUSH-BUTTON IGNITION SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch connector.
    3. Check continuity between push-button ignition switch terminals.

      Push-button ignition switch terminals

      Condition

      Continuity

      4 - 8

      Pressed

      Yes

      Not pressed

      No

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace push-button ignition switch. Refer to Removal and Installation .

scientia non olet · About LEMON Manuals