LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Body Control System) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit (BCM) >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. SAVING VEHICLE SPECIFICATION (BCM) 

    SYMBOL CONSULT Configuration

    Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification.

    Refer to Description .

    NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

    GO TO 2 .

  2. REPLACE BCM 

    Replace BCM. Refer to Removal and Installation .

    GO TO 3 .

  3. WRITING VEHICLE SPECIFICATION (BCM) 

    SYMBOL CONSULT Configuration

    Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure .

    YES

    GO TO 4 (With Intelligent Key).

    YES

    GO TO 5 (Without Intelligent Key).

  4. REGISTER INTELLIGENT KEYS 

    For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

    WORK END

  5. REGISTER MECHANICAL KEYS 

    For initialization and registration of mechanical keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

    WORK END

scientia non olet · About LEMON Manuals