Data Monitor Mode

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item	Unit	Description
PWM SIGNAL	COMM/NO COM	Displays the reception status of the PWM signal being sent from the EVSE or the charging device. COMM: Communicating normally NO COM: Not communicating
EVSE STATE JUDG	CNCT/ INPUT/ NONE/NO CNCT OR ERROR	Displays the engagement detection status of the normal charge connector. CNCT: There is no AC input in the charge connector connected status. INPUT: There is AC input in the charge connector connected status. NONE: The charge connector is not engaged or there is no PWM communication from the EVSE or the charging device. NO CNCT OR ERROR: The charge connector is not engaged and malfunction of EVSE, the charging device or during a power outage.
PD MODULE TEMP	deg.C	Displays the PDM (Power Delivery Module) internal temperature.
Power supply voltage value	V	Displays the 12V battery voltage of PDM (Power Delivery Module).
EV SYS W/L AND F/S REQ	Off/Off Off/On On/Off On/On	Displays the status of EV system warning lamp signal and fail-safe request signal transmission that is sent to the VCM. Off/Off: Non-transmit the EV system warning lamp signal / Non-transmit the fail-safe request signal Off/On: Non-transmit the EV system warning lamp signal / Transmit the fail-safe request signal On/Off: Transmit the EV system warning lamp signal / Non-transmit the fail-safe request signal On/On: Transmit the EV system warning lamp signal /Transmit the fail-safe request signal
PWM SIGNAL VOLTAGE	V	Display the PWM signal voltage from EVSE or the charging device.