Data Monitor
|
Item [Unit] |
Description |
|
|
IGN VOLT |
[V] |
Displays the ignition power supply voltage. |
|
CONTROL MODULE MALF |
[Off / On] |
Displays the chassis control module (with built in steering angle sensor) malfunction. |
|
CAN DIAG STATUS |
[Off / On] |
Displays CAN network diagnosis status. |
|
VEHICLE SPEED |
[km/h] |
Displays the vehicle speed. |
|
FR WHEEL SPEED |
[RPM] |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED |
[RPM] |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED |
[RPM] |
Displays the rotational speed of rear RH tire. |
|
RL WHEEL SPEED |
[RPM] |
Displays the rotational speed of rear LH tire. |
|
STEERING ANG SENSOR |
[deg] |
Displays the steering angle from the steering angle sensor. |
|
DECEL G SENSOR |
[G] |
Displays the decel G. |
|
SIDE G SENSOR |
[G] |
Displays the side G. |
|
YAW RATE SENSOR |
[deg/s] |
Displays the yaw rate. |
|
ACCELE PEDAL POSITION |
[%] |
Displays the accelerator pedal position. |
|
THROTTLE CONTROL |
[NORMAL / INCORR / PREV / INPOSSI] |
Displays the electric throttle status. |
|
SHIFT POSITION |
-- |
NOTE:
The item is indicated, but not monitored.
|
|
BRAKE SWITCH 2 |
[Off / On] |
Displays the brake pedal operating status. |
|
BRAKE SWITCH 1 |
[Off / On] |
Displays the brake pedal operating status. |
|
STOP LAMP SW |
[ACT / INACT] |
Displays the stop lamp switch status. |
|
PRESS SENSOR |
[bar] |
Displays the brake fluid pressure. |
|
ABS |
[NORMAL / ABNOR] |
Displays the ABS function status. |
|
ABS MALF |
[NORMAL / ABNOR] |
Displays the ABS function status. |
|
EBD |
[NORMAL / ABNOR] |
Displays the EBD function status. |
|
TCS |
[NORMAL / ABNOR] |
Displays the TCS function status. |
|
TCS MALF |
[NORMAL / ABNOR] |
Displays the TCS function status. |
|
VDC |
[NORMAL / ABNOR] |
Displays the VDC function status. |
|
VDC MALF |
[NORMAL / ABNOR] |
Displays the VDC function status. |
|
VDC OFF SWITCH |
[Off / On] |
Displays VDC OFF switch status. |
|
ATC 1 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
ATC 2 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
ATC 4 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
BRAKE HOLD |
[ACT / INACT / RELEA] |
Displays the brake hold status. |
|
ATC 3 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
FL TIRE DISP |
[DEF / 1] |
Displays the status of front LH tire displayed on the information display in the combination meter. |
|
FR TIRE DISP |
[DEF / 1] |
Displays the status of front RH tire displayed on the information display in the combination meter. |
|
RL TIRE DISP |
[DEF / 1] |
Displays the status of rear LH tire displayed on the information display in the combination meter. |
|
RR TIRE DISP |
[DEF / 1] |
Displays the status of rear RH tire displayed on the information display in the combination meter. |
|
VEHICLE DISP |
[DEF / 1] |
Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter. |
|
INTERRUPT DISP |
[NO REQ / HOLD 1 / HOLD 2] |
Displays the interruption status on the information display in the combination meter. |
|
TURN DISP |
[N STEER / LEFT / RIGHT] |
Displays the turning direction of intelligent trace control function and intelligent engine brake function on the information display in the combination meter. |
|
ATC DISP |
[Off / On] |
Displays the operating status of intelligent trace control function displayed on the information display in the combination meter. |
|
AEB |
[Off / On] |
Displays the intelligent engine control function status. |
|
ATC 5 |
[Off / On] |
Displays the intelligent trace control function operation status. |
|
ARC BRAKE |
[Off / On] |
Displays the active ride control (brake control) function operation status. |
|
HDC DISP |
-- |
Displayed but not used. |
|
BRAKE HOLD DISP |
[ACT / INACT / RELEA] |
Displays the operating status of hill start assist function displayed on the information display in the combination meter. |
|
AEB CVT PERMIT |
[Off / On] |
Displays the transaxle authorized state for intelligent engine brake function. |
|
AEB STATUS |
[Off / On] |
Displays the intelligent engine brake (brake control) function operation status. |
|
AEB COMMAND 1 |
[G] |
Displays the relative command value of intelligent engine brake function. |
|
AEB COMMAND 2 |
-- |
Displayed but not used. |
|
AEB SLIP RATE |
[%] |
Displays the slip ratio of intelligent engine brake function is operating. |
|
ATC SETTING |
[Off / On] |
Displays the setting status of intelligent trace control function by steering switch. |
|
AEB SETTING |
[Off / On] |
Displays the setting status of intelligent engine brake function by steering switch. |
|
Buckle switch |
[Off / On] |
Displays the seat belt buckle switch (driver side) status. |
|
VDC (ABH active) |
[Possible / Impossi] |
Displays the automatic brake hold active status at ABS actuator and electric unit (control unit). |
|
ABH (CCM) |
[On / Off] |
Displays the brake hold status at automatic brake hold. |
|
Slope |
[Slow / Steep] |
Displays the slope status. |
|
PB active request (VDC) |
[REQ / NO REQ] |
Displays the parking brake active request status to electric parking brake control module from ABS actuator and electric unit (control unit). |
|
CCM (VDC) |
[Normal / Abnormal] |
Displays the chassis control module (with built in steering angle sensor) status detected by ABS actuator and electric unit (control unit). |
|
PB active request (CCM) |
[REQ / NO REQ] |
Displays the parking brake active request status to electric parking brake control module from chassis control module (with built in steering angle sensor). |
|
ABH active request (CCM) |
[REQ / NO REQ] |
Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from chassis control module (with built in steering angle sensor). |
|
ABH malfunction |
[Normal / Abnormal] |
Displays the automatic brake hold status. |
|
ABH indicator lamp |
[On 1 / On 2 / Off] |
Displays the automatic brake hold indicator lamp status. |
|
ABH active request (ADAS) 1 |
-- |
Displays but not used. |
|
PB |
[APP 1 / APP 2 / RLS 1 / RLS 2] |
Displays the electric parking brake status. |
|
CCM (PB) |
[Normal / Abnormal] |
Displays the chassis control module (with built in steering angle sensor) status detected by electric parking brake control module. |
|
PB (ABH active) |
[Possible / Impossi] |
Displays the automatic brake hold active status at electric parking brake control module. |
|
PB malfunction status |
[Normal / ABN 1 / ABN 2 / Not used] |
Displays the electric parking brake status. |
|
ABH active request (ADAS) 2 |
-- |
Displays but not used. |
|
ABH active request (ADAS) 3 |
-- |
Displays but not used. |
|
ADAS |
-- |
Displays but not used. |
|
ABH SW |
[On / Off] |
Displays the automatic brake hold switch status. |
|
ABH SW indicator lamp |
[On / Off] |
Displays the automatic brake hold switch indicator status. |
|
ABH active judge (CCM) |
[OK / NG] |
Displays the judgement of automatic brake hold active states. |
|
Master warning |
[On / Off] |
Displays the master warning lamp request status. |
|
PB SW |
[Off / Release] |
Displays the electric parking brake switch status. |
|
ABH (ADAS) |
-- |
Displays but not used. |