Steering Angle Sensor

WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Non-operational status or standby status of the following functions can be selected using VDC OFF. VDC OFF indicator indicates the operation status of function. (ON: Non-operational status, OFF: Standby status)

Courtesy of NISSAN NORTH AMERICA, INC.
- VDC function
- TCS function
- Intelligent Trace Control function
- Active Ride Control function

NOTE: VDC OFF switch is in the steering switch.

NOTE: ABS function and EBD function control operates.

VDC OFF indicator turns OFF (standby status) when the engine is started again after it is stopped once while VDC OFF indicator lamp is ON (non-operational status).