LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> Altima SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Brake System) >> Unit Disassembly And Assembly >> Front Disc Brake >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2020 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake caliper from the vehicle. Refer to Removal and Installation .
  2. Remove the slide pins and the slide pin boots from the torque member. Refer to Exploded View .
  3. Remove the bushing from the slide pin.
  4. Place a wooden block in the brake caliper body and blow air from the union bolt hole to remove the pistons and piston boots.
    G04076646Courtesy of NISSAN NORTH AMERICA, INC.
    WARNING: Do not get fingers caught between the pistons and the brake caliper body.
    CAUTION: Do not reuse piston boots.
  5. Remove the piston seals from the brake caliper body using a suitable tool.
    G04082447Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Do not damage cylinder inner walls.
    • Do not reuse piston seals.
  6. Remove the bleeder valve and cap.
scientia non olet · About LEMON Manuals