LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> Altima SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Steering Control System (Direct Adaptive Steering)) >> Removal And Installation >> Steering Force Control Module >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove instrument lower panel. Refer to Removal and Installation .
  2. Disconnect steering force control module harness connectors. Refer to Exploded View .
  3. Remove the bolts of steering force control module mounting bracket.
  4. Remove the steering force control module.
    CAUTION: When replacing control module, replace the following control modules as a set:
    • Steering force control module
    • Steering angle main control module
    • Steering angle sub control module
scientia non olet · About LEMON Manuals