Removal and Installation: Installation
WARNING: This page is about a different car, the 2020 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.
Note the following, and install in the reverse order of removal.
- For installation, match mark (A) with mark (B).
- Temporarily tighten bolts in sequence.
- Torque to specification in reverse order.
|
(Bolts) |
: 6.4 N.m (0.65 kg-m, 57 in-Ib) |
CAUTION:
Perform additional service when replacing steering angle sub control module. Refer to Description .