TRANSFER CASE : Service Data
WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
(US pt, Imp pt)
GENERAL SPECIFICATIONS
|
Applied model |
PR25DD |
||||
|
CVT |
|||||
|
Transfer model |
TY21D |
||||
|
Oil Type |
Refer to Recommended Fluid and Lubricants . |
||||
|
Oil capacity (Approx.) |
0.31(5/8 pt, 1/2 pt) |
||||
|
Gear ratio |
0.404 |
||||
|
Number of teeth |
Ring gear |
42 |
|||
|
Drive pinion |
17 |
||||
Unit: mm (in)
Backlash
|
Item |
Standard |
|
Ring gear to drive pinion |
0.16 - 0.21 (0.0063 - 0.0083) |
Unit: mm (in)
Companion Flange Runout
|
Item |
Limit |
|
Companion flange face (inner side of the propeller shaft mounting bolt holes) |
0.15 (0.0059) |
|
Inside of companion flange (socket diameter) |
0.1 (0.004) |
Unit: N.m (kg-m, in-lb)
Preload Torque
|
Item |
Standard |
||
|
Pinion bearing preload |
0.66 - 1.22 (0.02 - 0.12, 6.0 - 10.0) |
||
|
Total preload |
With all oil seals |
P 1 + 0.7 - 1.0 (0.08 - 0.1, 7.0 - 8.0) |
|
|
Without oil seals (for transfer cover and transfer case) |
P 1 + 0.5 - 0.8 (0.06 - 0.08, 5.0 - 7.0) |
||