Chassis Control Display: Design/Purpose
WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
- The warning message is displayed on the vehicle information display when chassis control module (with built in steering angle sensor) detects an error in the chassis control system architecture. Please check the DTCs and investigate the cause of error.
- Each chassis control system information is displayed on the vehicle information display.
Warning Message
|
Design |
Warning Message |
|
-- |
Chassis Control System Error See Owner's Manual |
System Information
|
Design |
Description |
|
Active Ride Control inactive. Intelligent Trace Control inactive. |
|
|
Intelligent Trace Control is active. (Steering angle is less than the specified angle). |
|
|
Intelligent Trace Control assist is active. (Steering angle is the specified angle or more in the leftward direction). |
|
|
Intelligent Trace Control assist is active. (Steering angle is the specified angle or more in the rightward direction). |
|
|
Active Ride Control is active (assist). |
Indicator operating
- Active Ride Control: Refer to System Description .
- Intelligent Trace Control : Refer to System Description .