Re/Programming, Configuration
WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
Configuration includes the following functions.
|
Function |
Description |
|
|
Read/Write Configuration |
Before replacing ECU |
Allows the reading of vehicle specification (Type ID) written in Chassis Control Module (with built in steering angle sensor) to store the specification in CONSULT. |
|
After replacing ECU |
Allows the writing of vehicle information (Type ID) stored in CONSULT into the Chassis Control Module (with built in steering angle sensor). |
|
|
Manual Configuration |
Allows the writing of vehicle specification (Type ID) into the Chassis Control Module (with built in steering angle sensor) by hand. |
|
CAUTION:
Use "Manual Configuration" only when "TYPE ID" of Chassis Control Module (with built in steering angle sensor) cannot be read.