Detail Flow

WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Seat

Order

Input

Output

Control unit condition

Power seat switch

(sliding, lifting, reclining)

The power seat switch signal is inputted to the driver seat control unit when the power seat switch is operated.

Motors

(sliding LH, lifting LH, reclining LH)

The driver seat control unit outputs signals to each motor according to the power seat switch input signal.

Door Mirror

Order

Input

Output

Control unit condition

Door mirror remote

control switch

The door mirror remote control switch signal is inputted to the automatic drive positioner control unit when the door mirror remote control switch is operated.

Motors

(Door mirror motor)

The automatic drive positioner control unit actuates each motor according to the operation of the door mirror remote control switch.

NOTE: The door mirrors can be operated manually when ignition switch is in either ACC or ON position. The ignition switch signal (ACC/ON) is transmitted from BCM to the driver seat control unit via CAN communication and from the driver seat control unit to the automatic drive positioner control unit via UART communication.