Work Procedure: Description

WARNING: This page is about a different car, the 2020 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.

VCR control module requires the learning of VCR base position.

This learning must be performed where the following operations are performed:

Replacement of VCR control module
Replacement of VCR actuator

PRECONDITIONING
Check that all of the following conditions are satisfied.
- Engine oil temperature: 60 deg.C (140 deg.F) or more
- Engine running: idle speed
- Accelerator pedal: Full released
YES

GO TO 2.
PERFORM VCR BASE POSITION LEARNING
With CONSULT
1. Select "VCR base position learning" in "WORK SUPPORT" mode of "ENGINE" using CONSULT.
2. Touch "START".
Is "CMPLT" displayed on CONSULT screen?

YES

GO TO 3.

NO

Check that DTC is not detected and restart the learning.
ERASE DTC
Without CONSULT
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Erase DTC.
END