Work Procedure
WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
After replacing IPDM E/R, it is necessary to perform control unit configuration with CONSULT.
- REPLACE IPDM E/R
Replace IPDM E/R. Refer to IPDM E/R : Removal & Installation .
GO TO 2.
- WRITING VEHICLE SPECIFICATION (IPDM E/R)
CONSULT
Perform "After Replace ECU" of "Read/Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure .
Work End.