Work Procedure

PROGRAM THE ABS ACTUATOR AND ELECTRIC UNIT
CONSULT

Perform configuration of the ABS actuator and electric unit. Refer to Work Procedure .

NOTE: If this is a new/blank module, the ABS Actuator and Electric Unit will need to be programmed prior to configuration.

GO TO 2.
ADJUST NEUTRAL POSITION OF THE STEERING ANGLE SENSOR
CONSULT

Perform adjustment of the neutral position of steering angle sensor. Refer to Work Procedure .

GO TO 3.
CALIBRATION OF DECEL G SENSOR
CONSULT

Perform calibration of decel G sensor. Refer to Work Procedure .

Inspection End.