ADAS Control Unit Input/Output Signal Item
ADAS control unit receives signals via CAN communication. It also detects vehicle conditions that are necessary for Rear Cross Traffic Alert control.
Input Signal Item
|
Transmit unit |
Signal name |
Description |
||
|
TCM |
CAN communication |
Shift position signal |
Receives a selector lever position |
|
|
ABS actuator and electric unit (control unit) |
CAN communication |
Vehicle speed signal (ABS) |
Receives wheel speeds of four wheels |
|
|
Combination meter |
CAN communication |
System selection signal |
Receives a selection state of each item in "Driver Assistance" selected through the vehicle information display |
|
|
Side radar LH, RH |
ITS communication |
Vehicle detection signal |
Receives vehicle detection condition of detection zone. |
|
Output Signal Item
|
Reception unit |
Signal name |
Description |
||
|
Combination meter |
CAN communication |
Meter display signal |
BSW system display |
Transmits a meter display signal to turn ON the Blind Spot Warning system display |
|
Side radar LH, RH |
ITS communication |
Blind Spot Warning indicator signal |
Transmits a Blind Spot Warning indicator signal to turn ON the Blind Spot Warning indicator |
|
|
Blind Spot Warning indicator dimmer signal |
Transmits a Blind Spot Warning indicator dimmer signal to dim Blind Spot Warning indicator |
|||
|
Vehicle speed signal |
Transmits a vehicle speed calculated by the ADAS control unit |
|||
|
Warning system buzzer |
Warning buzzer signal |
Activates warning system buzzer |
||