Work Procedure

WARNING: Be careful of traffic conditions and safety around the vehicle when performing road test.

CAUTION:

Fully understand the following items well before the road test;
- Precautions: Refer to Precaution for RCTA System Service .
- System description for RCTA: Refer to System Description .
- Handling precaution: Refer to Precautions for Rear Cross Traffic Alert .

CHECK BLIND SPOT WARNING (BSW)/REAR CROSS TRAFFIC ALERT (RCTA) SYSTEM SETTING
1. Start the engine.
2. After start the engine wait for 30 seconds or more.
3. Enable the setting of the Blind Spot Warning (BSW) system on the combination meter.
4. Turn OFF the ignition switch and wait for 5 seconds or more.
5. Check that the previous setting is saved when the engine starts again.
INSPECTION END