LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2020 >> Sentra SR >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Removal And Installation >> Generator >> Removal and Installation >> Installation

Removal and Installation: Installation

  1. Install generator using the following procedure:
    1. Temporarily tighten bolts in the reverse sequence shown in illustration.
    2. Torque bolts to specification in the sequence shown in illustration.
    Fig 1: Generator Bolts Tightening Sequence
    GNSAWMIA1907Z-907Courtesy of NISSAN NORTH AMERICA, INC.

    Bolts

    : 25.0 N.m (2.6 kg-m, 18 ft-lb)
  2. Installation of remaining components is in the reverse order of removal.
    CAUTION:
    • Tighten "B" terminal nut carefully and to specification. Refer to Exploded View .
scientia non olet · About LEMON Manuals