CVT Fluid: Inspection

FLUID LEAKAGE

• Check transaxle surrounding area (oil seal and plug etc.) for fluid leakage.

• If transaxle appears to have oil seepage or a leak, follow the steps below to assist in a correct diagnosis.

Courtesy of NISSAN NORTH AMERICA, INC.

1. Thoroughly clean off the area of the suspected leak.
2. Insert 1 fluid ounce of Fluorescent Oil Dye into CVT.

   Tool number	: --(J-28431)

3. Drive Vehicle for a minimum 10 minutes.
4. Inspect for leaks with A/C Dye Kit.

   Tool number	: --(J-43926)

   NOTE:

   • Corrosion protection chemicals or assembly lubricants may cause dust to accumulate (gather) on the transaxle and have the appearance of an oil leak. Neither of these require corrective action.
   • If no fluorescent oil trace/leak is found no action is necessary.

   • If fluorescent oil trace/leak is found, repair or replace damaged parts and adjust CVT fluid level. Refer to Adjustment .