LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2020 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Electronic Control Modules (Service Information)) >> Module, Radio/Entertainment Telematics >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Fiat 124 Spider. However, it is still accessible from the selected car via links, so may be relevant.
  1. If removed, install the Radio/ETM to the radio display. Refer to DISPLAY, RADIO, REMOVAL AND INSTALLATION .
  2. Connect all the wiring harness connectors to the back of the radio assembly.
  3. Install the radio assembly into the instrument panel, be sure that all the clips are fully engaged.
  4. Install and securely tighten the radio assembly mounting screw.
    GC0176182Courtesy of CHRYSLER GROUP, LLC
  5. Connect the wiring harness connector (1).
    GC0175530Courtesy of CHRYSLER GROUP, LLC
  6. Install the center trim bezel (1b), be sure that all the clips are fully engaged.
  7. Install the lower right instrument panel trim. Refer to PANEL, INSTRUMENT PANEL TRIM, REMOVAL AND INSTALLATION .
  8. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals