Front Wiper Control
The IPDM E/R detects the front wiper stop position from the front wiper stop position signal.
When front wiper stop position signal is in the condition listed below while the front wiper is operating, the IPDM E/R activates the fail-safe.
|
Ignition switch |
Front wiper switch |
Front wiper stop position signal |
Fail-safe |
|
ON |
OFF |
The signal does not change from the battery voltage for 10 seconds. |
Stops front wiper power supply for 20 seconds |
|
Except OFF |
The signal does not change for 10 seconds. |