Work Procedure

1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. Refer to Tire Air Pressure .

GO TO 2.

Was Decel G-Sensor removed or replaced?

YES

GO TO 3.

NO

GO TO 4.

Perform calibration of decel G sensor. Refer to Work Procedure .

GO TO 4.

With CONSULT

1. Turn ignition switch ON.
   CAUTION: Never start engine.
2. Select "Work Support" in "TRANSMISSION".
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".
   CAUTION: Do not rock or jounce the vehicle during "G sensor calibration".

Is "COMPLETED" displayed?

YES

GO TO 5.

NO

Perform steps 2 and 3 again.

With CONSULT

1. Turn ignition switch OFF and wait for 10 seconds.
2. Turn ignition switch ON.
3. Select "Self Diagnostic Results" in "TRANSMISSION".

Is "P1585" detected?

YES

Go to DTC Index .

NO

Calibration end