Work Procedure

WRITING MODE SELECTION
CONSULT Configuration

Select "CONFIGURATION" of IPDM E/R.

GO TO 2.
PERFORM "MANUAL CONFIGURATION"
CONSULT Configuration
1. Select "MANUAL CONFIGURATION".
2. Identify the correct model and configuration list. Refer to Configuration list .
  CAUTION:
  - Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.
  - Make sure to select "SETTING" even if the indicated configuration of brand new IPDM E/R is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model cannot be memorized
3. Sets the displayed item and then select "NEXT".
  NOTE: If item is not displayed, select "NEXT".
4. Check that the configuration has been successfully written and touch "End".
GO TO 3.
OPERATION CHECK
Confirm that each function controlled by IPDM E/R operates normally.

Work End.