LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2020 >> Rogue SL, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Control System (Without Intelligent Key System) >> Removal And Installation >> Combination Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the steering angle sensor. Refer to Removal and Installation .
  2. Disconnect harness connector from combination switch.
  3. Remove screw (A) and combination switch (1).
    GNSAWMIA0709Z-709Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals