Work Procedure
- STEP 1
There are two ways of setting method.
Which method do you choose?
With CONSULT
GO TO 2.
With set switch
GO TO 3.
- STEP 2-A
CONSULT
- Select "EXIT SEAT SLIDE SETTING" then touch display to change between ON and OFF.
- EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
- Select "SEAT SLIDE VOLUME SET" and touch either "40 mm", "80 mm", or "150 mm".
- Then touch "OK".
GO TO 5.
- Select "EXIT SEAT SLIDE SETTING" then touch display to change between ON and OFF.
- WITH SET SWITCH - STEP 1
Turn ignition switch OFF.
GO TO 4.
- WITH SET SWITCH - STEP 2
Push set switch and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
- Entry/exit assist are ON: Memory switch indicator blink two times.
- Entry/exit assist are OFF: Memory switch indicator blink once.
GO TO 5.
- CONFIRM THE OPERATION
Check the entry/exit assist function setting is changed.
Is the setting changed?
YES
Inspection End.
NO
GO TO 1.