Additional Service When Replacing Control Unit: Description
Each function is reset to the following condition when the driver seat control unit is replaced. Refer to Work Procedure .
|
Function |
Condition |
Procedure |
|
Memory (Seat, mirror) |
Erased |
Perform storing |
|
Entry/exit assist |
ON |
Perform initialization |
|
Set slide amount* |
||
|
Intelligent Key interlock |
Erased |
Perform initialization |
|
Perform storing |
* : Default value is 40 mm.
NOTE:
Notice that disconnecting the battery when detected DTC are present will erase the DTC memory.