Work Procedure

WARNING: This page is about a different car, the 2020 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RECOMMUNICATING FUNCTION
1. Install ECM.
2. Contact backside of registered Intelligent Key* to push-button ignition switch, then press push-button ignition switch to ON.
  *: To perform this step, use the key that is used before performing ECM replacement.
3. Maintain ignition switch in the ON position for at least 5 seconds.
4. Press push-button ignition switch to OFF.
5. Check that the engine starts.
GO TO 2.
PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM
Perform Work Procedure (VQ35DD)

END