LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Versa Note SR >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Heater & Air Conditioning Control System) >> Basic Inspection >> Diagnosis And Repair Workflow >> Workflow >> Detailed Flow

Detailed Flow

WARNING: This page is about a different car, the 2017 Nissan Versa Note. However, it is still accessible from the selected car via links, so may be relevant.

  1. INTERVIEW CUSTOMER

    Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.

    GO TO STEP 2  .

  2. SYMPTOM CHECK

    Verify symptoms.

    GO TO STEP 3  .

  3. CHECK FOR DTCS

    G-20 With CONSULT

    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" of "BCM".
    3. Check DTC.

    Is any DTC detected?

    YES 

    GO TO STEP 4  .

    NO 

    GO TO STEP 5  .

  4. PERFORM DTC DIAGNOSTIC PROCEDURE

    Perform the diagnostic procedure for the detected DTC. Refer to DTC INSPECTION PRIORITY CHART (with Intelligent Key system) or DTC INSPECTION PRIORITY CHART (without Intelligent Key system).

    GO TO STEP 7  .

  5. OPERATION CHECK

    Perform the operation check. Refer to WORK PROCEDURE .

    GO TO STEP 6  .

  6. SYMPTOM DIAGNOSIS

    Check the symptom diagnosis table. Refer to SYMPTOM TABLE .

    GO TO STEP 8  .

  7. VERIFY REPAIR.

    G-20 With CONSULT

    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" of "BCM".
    3. Check DTC.

    Is any DTC detected?

    YES 

    GO TO STEP 4  .

    NO 

    GO TO STEP 8  .

  8. PERFORM FINAL OPERATION CHECK

    Perform the operation check. Refer to WORK PROCEDURE .

    Does it operate normally?

    YES 

    Inspection End.

    NO 

    GO TO STEP 2  .

scientia non olet · About LEMON Manuals