Work Procedure When Replacing Control Unit

WARNING: This page is about a different car, the 2017 Nissan Versa Note. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ZERO POINT RESET

Perform zero point reset. Refer to SPECIAL REPAIR REQUIREMENT .

Is zero point reset performed normally?

YES

INSPECTION END

NO

Check condition as per the following, and perform zero point reset again.
- Passenger seat is occupied by an object.
- Excessive vibration is applied while performing zero point reset.
- Occupant detection system is malfunctioning.
  NOTE:
  If "Incomplete" is displayed on "zero point reset current status", zero point reset is not completed normally. Check the condition as per the following and perform zero point reset again.
- Passenger seat is occupied by an object.
- Excessive vibration is applied while performing zero point reset.
- Occupant detection system is malfunctioning.