LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Fuel System (1.6L)) >> Disassembly And Assembly >> Fuel Level Sensor Unit >> Disassembly and Assembly >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different variant/trim than selected.

Use the following procedure to check for fuel leaks.

  1. Turn ignition switch "ON" (with engine stopped), then check connections for leaks by applying fuel pressure to fuel piping.
  2. Start engine and let it idle and check there are no fuel leaks at the fuel system connections.
scientia non olet · About LEMON Manuals